中文名称: | Porcn-IN-1 | ||||
---|---|---|---|---|---|
英文名称: | Porcn-IN-1 | ||||
别名: | Porcn-IN-1 N-((3-Fluoro-2a?methyl[2,4a?bipyridin]-5-yl)methyl)-9H-carbazole-2-carboxamide | ||||
CAS No: | 2036044-77-4 | 分子式: | C25H19FN4O | 分子量: | 410.4524 |
CAS No: | 2036044-77-4 | ||||
分子式: | C25H19FN4O | ||||
分子量: | 410.4524 |
基本信息
产品编号: |
P11599 |
||||
产品名称: |
Porcn-IN-1 |
||||
CAS: |
2036044-77-4 |
储存条件 |
粉末 |
-20℃ |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
两年 |
||
分子量 |
410.45 |
-20℃ |
1个月 |
||
化学名: |
N-((3-Fluoro-2a?methyl[2,4a?bipyridin]-5-yl)methyl)-9H-carbazole-2-carboxamide |
||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
≥ 100 mg/mL (243.64mM) |
|||
Water |
|
||||
Ethanol |
|
||||
体内(现配现用): |
|
||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
2.4364mL |
12.1820mL |
24.3641mL |
5mM |
0.4873mL |
2.4364mL |
4.8728mL |
10mM |
0.2436mL |
1.2182mL |
2.4364mL |
生物活性
产品描述 |
一种有效的 porcupine 抑制剂,IC50 值为 0.5±0.2nM。 |
靶点 |
IC50: 0.5±0.2nM (Porcupine inhibitor) |
体外研究 |
Porcupine is an enzyme that catalyses the addition of palmitoleate to a serine residue in Wnt proteins, a process which is required for the secretion of Wnt proteins. Porcupine-IN-1 is as potent as the clinical compound LGK974 in a cell based STF reporter gene assay. Porcn-IN-1 potently inhibits the secretion of Wnt3A, therefore is confirmed to be a porcupine inhibitor . |
体内研究 |
Porcn-IN-1 demonstrates moderate clearance under the treatment of human liver microsomes (57 mL/min/kg) and rat liver microsomes (24 mL/min/kg). It exhibits high clearance when treated with mouse microsomes (109 mL/min/kg). |
推荐实验方法(仅供参考)
Cell Assay |
HEK293T cells are transfected with pLinbin-Wnt3A plasmid or vehicle control. The HEK293T cells are then treated with or without compounds (Porcn-IN-1). Western Blot is used after 48 h to analyze both the cell lysis and culture medium |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )