中文名称: | 丹磺酰氯 促销 | ||||
---|---|---|---|---|---|
英文名称: | Dansyl chloride | ||||
别名: | 丹酰氯;5-(二甲氨基)萘-1-磺酰氯 DNSCl | ||||
CAS No: | 605-65-2 | 分子式: | C12H12ClNO2S | 分子量: | 269.75 |
CAS No: | 605-65-2 | ||||
分子式: | C12H12ClNO2S | ||||
分子量: | 269.75 | ||||
MDL: | MFCD00003985 | EINEC: | 210-092-6 | ||
EINEC: | 210-092-6 |
基本信息
产品编号: |
D50024 |
||||
产品名称: |
Dibucaine hydrochloride |
||||
CAS: |
61-12-1 |
储存条件 |
粉末 |
室温 |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
6个月 |
||
分子量: |
379.92 |
-20℃ |
1个月 |
||
化学名: |
2-Butoxy-N-(2-(diethylamino)ethyl)quinoline-4-carboxamide hydrochloride |
||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
|
|||
Ethanol |
|
||||
Water |
|
||||
体内(现配现用): |
|
||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
2.6321mL |
13.1607mL |
26.3213mL |
5mM |
0.5264mL |
2.6321mL |
5.2643mL |
10mM |
0.2632mL |
1.3161mL |
2.6321mL |
生物活性
产品描述 |
一种钠通道抑制剂。Dibucainehydrochloride是有效的SChE抑制剂。 |
靶点 |
Sodium Channel |
体外研究 |
Dibucaine hydrochloride (Cinchocaine hydrochloride) reduced the degradation of BSA-gold complex in the reservosomes,which was not caused either by an inhibition of the whole proteolytic activity of the parasite or by a reduction on the expression levels of cruzipain.Dibucaine,a quaternary ammonium compound,inhibited SChE to a minimum within 2 min in a reversible manner.The inhibition was very potent.It had an IC(50) of 5.3 microM with BuTch or 3.8 microM with AcTch.The inhibition was competitive with respect to BuTch with a K(i) of 1.3 microM and a linear-mixed type (competitive/noncompetitive) with respect to AcTch with inhibition constants, K(i) and K(I) of 0.66 and 2.5 microM,respectively.Dibucaine possesses a butoxy side chain that is similar to the butryl group of BuTch and longer by an ethylene group from AcTch. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )