中文名称: 利血平
英文名称: Reserpine
CAS No: 50-55-5
分子式: C33H40N2O9
分子量: 608.68
EINEC: 200-047-9
R70001 利血平 ≥98% (psaitong)
熔点:
264.5°C
旋光率:
-115 - -131°
外观与性状:
白色至浅褐色粉末
包装规格:
1g 5g 25g in poly bottle
产品简介:
一种抑制儿茶酚胺和血清素的摄取。
溶解性:
溶于DMSO、氯仿(10MG/ML)、水(<1MG/ML)和乙醇(<1MG/ML)
储备液保存:
-80°C, 6 months
-20°C, 1 month
(protect from light)
体内实验:
1、请依序添加每种溶剂:10% DMSO→40% PEG300→5% Tween-80→45% Saline
Solubility: ≥ 2.5 mg/mL (4.11 mM); 澄清溶液
此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL。
2、请依序添加每种溶剂:10% DMSO→90% Corn Oil
Solubility: ≥ 2.5 mg/mL (4.11 mM); 澄清溶液
此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液,此方案实验周期在半个月以上的动物实验酌情使用。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
VMAT2
体外研究:
Reserpine is an inhibitor of the vesicular monoamine transporter 2 (VMAT2). Reserpine displays a significant effect on the density of dopamine D1 receptors (F2,12=8.81, p<0.01) in the rat striatum. The affinity (Kd) for the dopamine D1 and D2 receptors during withdrawal from acute and chronic administration of reserpine is not change. IC50 values of 43.9 and 54.9 μM are obtained after 1 day of treatment with Reserpine in JB6 P+ and HepG2-C8 cells, respectively. Reserpine induces luciferase activity in a dose-dependent manner at concentrations ranging from 5 to 50 μM, and no significant induction is observed at concentrations lower than 5 μM. Results demonstrate that Reserpine (2.5 to 10 μM) also increases the protein expression of Nrf2, HO-1, and NQO1. Reserpine at concentrations of 2.5 to 10 μM decreases the mRNA expression of DNMT1, DNMT3a, and DNMT3b in a concentration-dependent manner in JB6 P+ cells after 7 days of treatment. Reserpine at 10 μM generates a significant difference for DNMT3a expression (p<0.05).
体内研究:
Reserpine 可用于动物建模,构建胃肠溃疡模型。
保存条件:
室温
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):