中文名称: 刃天青钠盐
英文名称: Resazurin sodium salt
CAS No: 62758-13-8
分子式: C12H6NNaO4
分子量: 251.17
EINEC: 263-718-5
R10009 刃天青钠盐 Dye content:≥80% (psaitong)
外观与性状:
黑色粉末
包装规格:
1g 5g 25g in glass bottle
溶解性:
溶于水和1M氢氧化铵溶液
产品描述:

基本信息

产品编号:

R10009

产品名称:

Resazurin sodium salt

CAS:

62758-13-8

 

储存条件

粉末

室温

四年

分子式:

C12H6NNaO4

溶于液体

-80℃(密封存放,防潮)

6个月

分子量:

251.17

-20℃(密封存放,防潮)

1个月

化学名: 

Resazurin sodium salt,certified by the Biological Stain Commission

Solubility (25°C):

 

体外:

 

DMSO

 

Ethanol

 

Water

 

体内(现配现用):

 

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

 

制备储备液

 

浓度

 

溶液体积

质量

 

1mg

 

5mg

 

10mg

1mM

3.9814mL

19.9068mL

39.8137mL

5mM

0.7963mL

3.9814mL

7.9627mL

10mM

0.3981mL

1.9907mL

3.9814mL

 

生物活性

产品描述

氧化还原指示剂;厌氧指示剂。

靶点

Bacterial

体外研究

Resazurin sodium (Diazoresorcinol sodium) is commonly used to measure bacterial and eukaryotic cell viability through its reduction to the fluorescent product resorufin.No viable bacteria are detected 24h post-inoculation following inclusion of Resazurin sodium in TSBc cultures of F.tularensis LVS at the concentration of 44μM.Lowering the Resazurin sodium concentration to as little as 4.4μM still results in a 10-fold reduction in viable F.tularensis LVS compare to growth medium alone.Both Resazurin sodium treatments result in a significant decrease in viable F.tularensis LVS bacteria over 22h.Treatment with Resazurin sodium significantly reduces the number of viable F.tularensis LVS bacteria in HEK293 cells 22h post-infection.

 

推荐实验方法(仅供参考)

细胞实验:

 

F.tularensis is cultured in TSBc supplemented with 44μM Resazurin sodium salt at 37℃ with shaking for 24h.At select time points,a Spectronic 200 Spectrophotometer is used to measure the absorbance at 600nm and 570nm to detect the presence of Resazurin sodium salt and resorufin,respectively.The ratio of these two optical densities is used to evaluate reduction of Resazurin sodium salt to resorufin over time.

保存条件:
室温
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):